MARL COATINGS 10 LITRES BLOCK PAVING CONCRETE IMPRINT SEALER WET LOOK HEAVY DUTY FAST CURE

Marl Coatings Ltd – The Professional’s Choice in Block Paving Sealers

From the company who has it covered.

KEY FEATURES

• One-coat application – depending on porosity of surface two coats can be applied if needed.
• Fresh, new “wet look” finish
• Polyurethane hard-set, fast-drying technology
• Easy to apply with roller or brush

PRODUCT DESCRIPTION

Marl Coatings Ltd Heavy Duty High Impact Clear Wet Look Block Paving Sealer is a premium-grade, solvent-based polyurethane formulation designed to rejuvenate and protect tired or faded block paving. It delivers a durable, professional wet look finish and long-lasting protection.

BENEFITS

• Superior performance vs. most other sealers on the market
• Helps resist oil, grease, and dirt stains
• Inhibits algae and fungal growth
• Creates a wet look.
• Reduces moss growth and sand loss between joints
• Extends the life of paving by sealing and protecting joint sand
• Helps prevent block sinking caused by weather and washing
• Cost-effective alternative to full driveway replacement

TECHNICAL INFORMATION

• Finish: clear wet look- semi finish.
• Coverage: Approx. 120m² per 20-litre drum
• Application: Roller or brush
• Drying Time (15–20°C):
  • Surface dry: approx. 2 hours
  • Recoat: minimum 8 hours
  • Lower temperatures and high humidity will increase drying times
• Cleaning: Use white spirit.
  Do not dispose of product or residue into drains or watercourses.

SURFACE PREPARATION

• Surface must be clean, dry, and free from grease, oil, algae, and contaminants.
• Always apply a test patch before coating the entire area.
• Not suitable for use on Indian or sandstone paving—test before use.

APPLICATION INSTRUCTIONS

1. Mix: Activate product for 5 minutes before application.
2. Apply: Use a brush or roller to apply an even coat.
3. Conditions: Do not apply in high humidity, damp conditions, or when rain is expected.
4. Safety: Product cures by solvent evaporation. Use in well-ventilated areas only.
5. Aftercare: Avoid walking or driving on surface until fully cured.

IMPORTANT SAFETY & USAGE NOTES

• Only apply to completely dry surfaces—free from rain, oil, and dirt.
• Wet look finish may become slippery, especially when wet or during winter months.
  Marl Coatings Ltd accepts no liability for slip-related accidents.
• Safety Data Sheets (SDS) and Technical Data Sheets (TDS) available upon request or via our product pages.

DISCLAIMER & LEGAL NOTICE

All Marl Coatings Ltd products are supplied under the condition that they are used only for the intended purpose as specified by the manufacturer. We are not liable for damage, injury, or loss resulting from incorrect use, handling, or advice—whether by the customer, their employees, or third parties. This includes, but is not limited to, property damage, personal injury, or loss of profit/contracts.

All advice and product information are given in good faith but without legal responsibility. Shade variations may occur. Always retain batch codes for reference if future colour matching is needed.

To the maximum extent permitted by law, Marl Coatings Ltd disclaims all express or implied warranties regarding the accuracy of the information provided in this document or online.