Price range: £34.99 through £45.99
marlcoatingsltd
The professional’s choice of asphalt / tarmac restorer from marlcoatingsltd the company who have it covered
* One coat application
* Fresh layed finish
* thermoplastic acrylic polymer fast dry technology
* Environmentally friendly
* Easy to apply
* Available in a choice of Black, Red, Green,Blue,also
White and yellow line marking
Suitable for use on any worn Asphalt or Tarmacadm surface. Provides 8m square coverage per Ltr. Coverage rate will be dependent on the surface conditions.
PRODUCT DESCRIPTION
* Water based thermoplastic acrylic polymer Tarmac Repair coating, environmentally
friendly easy to apply product
* Top up coats Of Tarmac sealer can be applied at any time
* Reduces Tarmac stone loss and increases the life span of the Tarmac driveway’s
* Waterproofs, re-colours and protects Tarmac
* Helps Resists oil, grease and dirt stains
* Resists fungicidal and algae growth
DETAILED
marlcoatingsltd thermoplastic acrylic polymer Tarmac sealer is a superb easy to apply Tarmac restorer designed to rejuvenate and transform tired old tarmac. marlcoatingsltd tarmac thermoplastic acrylic polymer is far superior to a tarmac paint and offers a cost effective alternative to replacement of driveway.
* Transform the appearance of any existing Tarmac Driveway/Walkway/Car-Park
* Replaces lost resin from Tarmac, vastly superior to bitumen based tarmac paint
* 20 litre drum, average coverage 160 sq metres
* Easy to apply with roller
* Re-creates original colour of Tarmac
* Avoids need for expensive replacement of asphalt
* Long term protection, reduces future Tarmac repair
* Covers unsightly cement & oil stains or marks
SURFACE
Surfaces should be dry and free from dirt, Grease and all other contaminants.
Always apply a test patch before coatings a
whole area
APPLICATION
After 5 min activate mix apply onto the surface using roller or brush. Since the product dries by evaporation of water it should not be applied under conditions of high humidity or where there is a risk of high condensation during the drying period.
DRYING TIME
(At 15-20 Degrees C) Surface dry approx 2 hours. Overcoating minimum 8 hours, These times will be extended at lower temperatures and also in conditions of high humidity.
THEORETICAL COVERING CAPACITY
8 sq. m/litre at 60 microns dry film thickness. Please allow for wastage and surface porosity
CLEANING
Clean by using tap water do not empty product or brush resadue in to drains or watercouses
Supplying the best quality products to the uk & Europe at the best prices and service levels
ONLY APPLY WHEN DRY AND FREE FROM RAIN/OIL/DIRT
Proper Use of Products:
FOLLOW WATERBASED ACRYLIC PRODUCT DIRECTION FOR USE RIGHT SIDE ON REAR OF CAN.
Product data sheets are available for various products supplied by marlcoatingsltd and can normally be downloaded directly from the relevant product page. Please ensure that you refer to the relevant data sheets for products purchased for the correct application methods and coverage rates. In the event of a data sheet not being available please contact us for further information on a particular product.
All products are supplied and provided on the condition that we cannot be held responsible in the event they are used for any other purpose than that specified by the manufacturer,marlcoatingsltd shall not be liable to the customer in the event of damage to goods/property, injury to persons resulting from negligent or improper use/application or handling/advice of goods by the customer or their employees
Any recommendations and advice offered are given without legal responsibility. marlcoatingsltd shall not be liable to the customer in the event of damage to goods/property or injury to persons resulting from negligent or improper use/aplication or handling/or advice of goods by the customer, their employees or their agents or members of the general public, or any loss of profit or contracts or other consequential losses of any kind however caused.
To the extent permitted by applicable law, marlcoatingsltd disclaims all warranties, express or implied, as to the accuracy of the information contained in any of the materials on this website.
